3.2 添加
填料
PU膠中添加合適的填料可以降低
收縮應力和熱應力，從而提高其耐熱性。由于聚氨酯中有機和無機部分相互作用形成獨特的界面效應和協同作用，使得這種材料具有更高的熱和氧穩定性。按有機相和無機相的相互作用關系可[30]將混合聚氨酯分為2類 ：第1類是有機與無機相通過弱鍵如氫鍵、范德華力和靜電力相互作用，另一類則是有機相和無機相通過共價鍵結合。常用的填料有
纖維（如
玻璃纖維、
云母等）、粉末（如纖維素、二氧化硅、三氧化二
鋁等）、片狀材料（如滑石）、塊狀材料（如重晶石）及納米粒子或功能納米粒子。[31]
Sebastian Clauβ等 在單組分PU膠中加入體積分數30%的白堊，膠接接頭的熱穩定性明顯提高。B. S. Kim等[32]分別用疏水和
親水性基團改性的2種納米二氧化硅增強UV固化聚氨酯乳液，發現隨著納米二氧化硅加入量的增[33]加，聚氨酯降解溫度尤其是硬段降解溫度增加。Lee等 研究了水性聚氨酯/粘土納米復合材料，也發現體系中含有粘土越多其耐熱性就越高。
4 結束語
在聚氨酯膠粘劑的制備和使用過程中應充分了解其結構與性能的關系，根據使用的目的和要求合理進行設計。目前，開發新型耐熱聚氨酯膠粘劑，研發新的合成技術、新的添加材料以及相應機理研究已成為聚氨酯研究的重點。
參考文獻
[1]李紹雄,劉益軍.聚氨酯
膠黏劑[M].北京:化學工業出版社,1998.2-3.
[2]Oprea S.Effect of structure on the thermal stability ofcurable polyester urethane urea acrylates[J].PolymerDegradation and Stability,2002,75(1):9–15.
[3]Semsarzadeh M A,Navarchian A H.Effects of NCO/OHratio and catalyst concentration on structure,thermalstability,and crosslink density of poly(urethane-isocyanurate)[J].Applied Polymer Science,2003,90(4):963–972.
[4]Song Y M,Chen W C,Yu T L,et al.Effect of isocyanates ont h e c r y s t a l l i n i t y a n d t h e r m a l s t a b i l i t y o fp o l y u r e t h a n e s [ J ] . A p p l i e d P o l y m e rScience,1996,62(5):827–834.
[5]袁開軍,江治,李疏芬,等.聚氨酯的熱分解研究進展[J].
高分子材料科學與工程,2005,21(4):51-55.
[ 6 ] G a j e w s k i V . C h e m i c a l d e g r a d a t i o n o fpolyurethane[J].Rubber World,1990,202(6):15.
[7]Petrovic Z S,Zavargo Z,Flynn J H,et al.Thermaldegradation of segmented polyurethanes[J].Applied PolymerScience,1994,52(6):1087–1095.
[8]Vieweg R,Hoechtlen A.Plastics handbook[M].Munich:CarlHanser Publishers,1966.
[9]Ferguson J,Petrovic Z.Thermal stability of segmentedp o l y u r e t h a n e s [ J ] . E u r o p e a n P o l y m e rJournal,1976,12(6):177–181.
[10]Dombrow B A.Chemistry [A].H.R.Simonds.Polyurethanes (second edition)[C].New York:ReinholdPublishing Corp,1965:12–33.
[11]Ballistreri A,Foti S,Maravigna P,et al.Mechanism ofthermal degradation of polyurethanes investigated by directpyrolysis in the mass spectrometer[J].Polymer Science:Polymer Chemistry Edition,1980,18(6):1923–1931.
[12]Dyer E,Hammond R.J.Thermal degradation of N-substituted polycarbamates[J].Polymer Science Part A: GeneralPapers,1964,2(1):1–14.
[13]Liaw D J,Lin S P.Phosphorus-containing polyurethanesbased on bisphenol-S,prepared by N-alkylation[J].EuropeanPolymer Journal, 1996,32(12):1377–1380.
[14]Bilbao R,Mastral J F,Ceamanos J,et al.Kinetics of thethermal decomposition of polyurethane foams in nitrogen andair atmospheres[J].Journal of Analytical and AppliedPyrolysis,1996,37(1):69–82.
[15]Gray R L,Lee R E.Scorch inhibitors for flexiblep o l y u r e t h a n e s [ M ] . L o n d o n : P r i t c h a r dM,Chapman&Hall,1998.567–575.
[16]Gaboriaud F,Vantelon J P.Mechanism of thermaldegradation of polyurethane based on MDI and propoxylatedtrimethylol propane[J].Journal of Polymer Science:PolymerChemistry Edition,1982,20(8):2063–2071.
[17]李仙會.聚氨酯
彈性體的降解及其
穩定劑[J].聚氨酯工業,2000,15(2):1.
[18]劉 涼 冰 .聚 氨 酯 彈 性 體 的 耐 熱 性 能 [J].彈 性體,1999,9(3):41.
[19]Li Y,Gao T,Linliu K,et al.Multiphase structure of asegmented polyurethane: effects of temperature andannealing[J].Macromolecules,1992,25(26):7365–7372.
[20]孫艷美,郭建平,沈加春,等.不同硬段型水性聚氨酯膠黏劑的合成和性能比較[J].科技導報,2010(5):68-73.
[21]Zhang Y,Shang S,Zhang X,et al.Influence of thecomposition of rosin-based rigid polyurethane foams on theirthermal stability[J].Journal of Applied PolymerScience,1996,59(7):1167–1171.
[22]Sarkar S,Adhikari B.Thermal stability of lignin–hydroxy-terminated polybutadiene copolyurethanes[J].Polym DegradStabil,2001,73(1):169–175.
[23]FERRAI R J.Polyether and polyester urethane elastomersa comparison[J].Rubber Age,1967,99(2):53-57.
[24]Fabris H J.Thermal and oxidative stability ofurethanes[M].Westport: Technomic,1976.89–111.
[25]左曉兵,蔣錫群,楊昌正.多異氰脲酸酯及其應用[J].聚氨酯工業,2001,16(2):9-12.
[26]盧冶,朱秀玲,賽錫高.含雜萘酮聯苯結構耐高溫聚氨酯膠粘劑的合成[J].聚氨酯工業,2003,18(2):18-20.
[27]莊嚴,姚小寧,王小勝,等.高溫蒸煮復合包裝袋用聚氨酯膠粘劑的研究[J].粘接,2005,26(3):24-26.
[28]Petrova A P.Polyurethane adhesives based on carborane-containing compounds[J].Polymer Science SeriesC,2007,49(3):251-254.
[29]張恩天,陳維君,李剛,等.俄羅斯的耐高溫
結構膠粘劑[J].化學與粘合,2004(1):33-35.
[30]Chattopadhyay D K,Raju KVSN.Structural engineering ofpolyurethane coatings for high performanceapplications[J].Prog Polym Sci,2007,32:352–418.
[31]Sebastian Clauβ,Karin Allenspach,Joseph Gabriel,etal.Improving the thermal stability of one-componentpolyurethane adhesives by adding filler material[J].WoodScience and Technology,2011,45(2):383-388.
[32]Kim B S,Park S H,Kim B K.Nanosilica-reinforced UV-cured polyurethane dispersion[J].Colloid PolymSci,2006,284(9):1067–1072.
上一頁123下一頁
